1. You can activate or deactivate the device.
2. Use the Edit button to access the ViewGroup editor window.
3. The GroupSelector Dial allows you to switch between ViewGroups,
4. Open the Detail View by using this button.
5. G1-G10 buttons correspond to specific ViewGroups and can be mapped accordingly.
6. You can choose between two modes: Keep Last Selected Track (when you change a ViewGroup, it remains on the last selected track) or Jump to New First Track Mode (when you change a ViewGroup, it selects the first track with a matching keyword in your project).
7. There are two modes available: Only Apply (after selecting a ViewGroup, you can manually adjust track height) or ForceView Mode (when you select a track in your project, the device will force the selected ViewGroup, preventing your project from changing).
8. Use the "CollapseAll" button to collapse all tracks in your project.
9. Use the "ExpandAll" button to Expand all tracks in your project.
10. If Latch mode is enabled, you can combine multiple ViewGroups by activating more than one at the same time.
11. Decrease the height of the tracks in the selected ViewGroup to get a better overview of your tracks. Or Increase the height of the tracks in the selected ViewGroup to focus on specific tracks.
12. Expand or Collapse all Return tracks in your project.
13. The same as the normal Height buttons, but for the Return tracks.
